Wilier Verticale SLR Dura Ace Di2 Disc Road Bike
Our lightest bike ever
Lightness must be controlled. Making a lightweight frame is relatively simple, but making a lightweight one with top-notch performance and riding qualities requires a strong legacy. The Verticale SLR is the best example of what we have been, and of what we do best: a racing bike that has improved weight over the Wilier 0 SLR - the previous climbing model made by Wilier - by almost 10% (9.73% on the kit comprising frame, fork, handlebars, and seatpost).Lighter weight, greater responsiveness, improved. The Verticale SLR is today the best calling card for Wilier, the new generation of the best Italian bicycle manufacturers. performance levels.
Outstanding carbon
When we address the frame of a climbing bike, the first aspect we need to consider is the raw material used. Using the highest quality composite materials is the starting point to give rise to a project that focuses fully on top-level performance. For the Verticale SLR, we specifically used 3 types of fibres produced by Toray, a Japanese multinational and leader in the carbon fibre market, especially T800, T1100, and M46JB.
New integrated V Bar
The handlebar is in carbon monocoque and features a brand-new design weighing approximately 310 grammes. The first thing that strikes you is the special shape with differentiated handlebar width. If you look at it from the front, the high grip on the controls is narrower at the bottom. This particular shape was devised to provide concrete solutions to the needs of professionals, who season after season scout for optimum aerodynamic solutions which comply with the rules and standards set by the UCI. There is a trend to narrow it while nevertheless having a wider low grip to guarantee better handling, which is a key requirement when sprinting. The delta between the top and the bottom is 30 mm. V Bar, like the other monocoque handlebars in the Wilier range, is also compatible with our other premium bikes. It is available in 6 sizes, 2 with a width of 37/40mm, with 90 and 100mm stems, 4 with a width of 39/42mm, with 110, 120, 130 and 150mm stems.
Integrated cyclocomputer mount
The pursuit of a reduced overall handlebar weight has led us to develop a purpose-designed cyclocomputer mount stick, made entirely of aluminium which, unlike its predecessors, fits entirely in the handlebar. It is secured thanks to two through holes which have enabled us to optimise weight further compared to previous models. At the rear, in the fork-sleeve handlebar stem area, you can see that the tightening system is different . The screws tighten on two aluminium inserts, a solution that makes replacement easier in the tightening part, while also improving the distribution of force on the composite part. The rear of the stem is finished with a rubber insert to prevent dirt and sweat from penetrating the handlebar, thereby preserving its reliability in the long run.Seatpost with light or integrated number
We redesigned the seatpost with two possible setbacks: 0° and -15°, both are equipped with two special holes for the installation of a rear light or to affix race numbers.
Asymmetrycal fork
The challenge was to improve the weight and performance of an apparently simple component. We retained the characteristic asymmetrical shape. The sections on the rod housing the brake calipers have been oversized, whereas the right seat stay sections are lighter and thinner. A new feature is the left fork stay which is twisted. This shape is an improvement for two reasons: improved orientation of the carbon fibres during rolling (to respond better to stresses) and the improved resistance to forces exerted by the calipers during braking.
New racing geometries
The first great difference compared to the Wilier 0 SLR was the change in reach. We focused on what the cyclist is most interested in. In other words their hand position in relation to the bottom bracket box. The result is a change in the frame geometries and in the handlebar geometries. The bike stack has remained unchanged. Its reach on the other hand has been slightly shortened for sizes XS and S, while for sizes XL and XXL it has been extended compared to our classic geometries. As for the handlebar, we focused on positions C0 and C1, the most performing for the athlete. This allowed us to deliver a product which, in terms of fitting, is suitable for all needs and any type of rider.
Features
- Shimano Dura Ace Di2 12 Speed Groupset Inc Power Meter
- New Wilier Integrated V Handlebar
- Miche Kleos Carbon Wheelset RD 36mm
- Ceramic Speed Bottom Bracket
- Vittoria Corsa Pro 700x28c Tyres
- Clearance Up To 32mm Tyres
- Frame Weight 720g +/- 5%
All bikes when purchased come with a free set up, custom bike fit with our Body Scanning CRM laser fitting module & a free service when collected in-store. For more information on deciding the best fit if you cannot make it to our retail outlet then please use the following Bike Sizing Guide.
Please Note: Various spec. & colour options available, please call or email for further details.
Please note: Image shown for representation of colourway only, specification subject to change at any time.